...
🇨🇳 Meet SonnePower at bauma CHINA 2026   |   Nov. 24–27, 2026   |   Shanghai New International Expo Centre (SNIEC)   |   BOOTH N1.576 🇨🇳 Meet SonnePower at bauma CHINA 2026   |   Nov. 24–27, 2026   |   Shanghai New International Expo Centre (SNIEC)   |   BOOTH N1.576

Vehicle Control Architecture for Multi-Mode Steering in Straddle Carriers

Table of Contents

Multi-mode steering is a core vehicle control capability in modern straddle carriers and RTG cranes.
To support straight driving, crab steering, Ackermann turning, and pivot rotation on a single platform, steering must be coordinated at the vehicle control level rather than by individual actuators.

SonnePower provides a vehicle control solution for multi-mode steering, based on a centralized vehicle controller (VCU) that manages steering mode logic, calculates wheel target angles, and coordinates multiple steering axes via CAN communication.

Why Multi-Mode Steering Requires Vehicle Control

Straddle carriers operate in ports and container terminals where space is limited and maneuverability is critical.
Unlike road vehicles with mechanically linked steering, straddle carriers typically rely on electronically controlled steering systems, where multiple steering actuators must be coordinated by a central vehicle controller.

In real operation, the vehicle control system must support a wide range of movement scenarios, including:

  • Accurate container alignment in dense stacking areas

  • Lateral positioning during loading and unloading

  • Low-speed maneuvering in narrow lanes

  • Vehicle reorientation within confined spaces

Each of these scenarios places different demands on steering behavior and wheel angle coordination.
A single steering strategy controlled at the actuator level is insufficient. As a result, multi-mode steering managed by the vehicle control system has become a standard requirement in modern straddle carrier design.

Common Steering Modes in Straddle Carriers

Straight Forward Steering

Straight driving mode aligns all steering wheels to the same angle, typically zero degrees, and is used for normal travel and longer-distance movement within the terminal.

From a vehicle control perspective, this mode requires the central vehicle controller to continuously monitor and correct steering angle deviations across all steering axes.
Load variation, mechanical tolerance, and actuator response differences make controller-based closed-loop coordination essential to maintain straight-line stability.

Crab Steering

Crab steering enables all wheels to steer at the same angle and in the same direction, allowing the vehicle to move laterally or diagonally.

This mode is commonly used for precise side alignment with containers and docking operations.

At the control level, crab steering places high demands on the vehicle controller’s multi-axis synchronization capability.
Even small steering angle mismatches between wheels must be detected and corrected by the controller to prevent lateral drift or increased mechanical stress.

Ackermann Steering

Ackermann steering is applied during turning maneuvers where different wheels follow different turning radii.
Steering angles are calculated based on vehicle geometry to minimize tire slip and wear.

This steering mode relies on the vehicle controller to perform geometry-based steering angle calculation and to distribute different target angles to inner and outer wheels.
Accurate execution across multiple steering actuators requires controller-level coordination rather than independent actuator control.

Pivot / Orbit Steering

Key Challenges in Multi-Mode Steering Control

Multi-Axis Coordination

Straddle carriers typically feature four or more independently steered wheel assemblies.
The vehicle control system must coordinate all steering axes simultaneously to ensure consistent response and avoid structural stress or abnormal tire wear.

This level of coordination cannot be achieved through independent actuator control.
It requires a vehicle-level controller capable of synchronizing steering commands, monitoring feedback from all axes, and continuously correcting deviations in real time.

Smooth Steering Mode Transitions

In real operation, steering modes are switched frequently.
The control system must manage these transitions smoothly, ensuring predictable vehicle behavior and preventing sudden mechanical shocks.

From a system perspective, steering mode transitions must be handled at the vehicle control level, where steering angles across all wheels can be interpolated and coordinated.
Without centralized control logic, mode switching can result in conflicting commands and unstable vehicle motion.

Closed-Loop Steering Control

Due to the high torque and low-speed characteristics of steering actuators used in heavy port equipment, open-loop control is insufficient.

A vehicle-level steering solution typically includes:

  • Steering angle feedback via encoders

  • Closed-loop angle or position control

  • Zero-position calibration and long-term drift compensation

These functions are managed by the vehicle controller, ensuring consistent steering behavior across all operating modes and compensating for mechanical wear and environmental variation over time.

SonnePower Vehicle Control Solution for Multi-Mode Steering

SonnePower addresses these challenges with a vehicle control solution designed for multi-mode steering in straddle carriers.

At the core of the solution is a central vehicle controller (VCU) responsible for system-level steering coordination.
The controller manages steering mode selection, calculates target steering angles for each wheel based on vehicle geometry, and synchronizes steering behavior across all axes via CAN-based communication.

This centralized architecture ensures consistent steering performance across all operating modes and integrates seamlessly into the overall straddle carrier electrical control system.

Core Capabilities of the Steering Control Solution

The SonnePower vehicle control solution provides:

  • Centralized coordination of multiple steering axes

  • Configurable management of straight, crab, Ackermann, and pivot steering modes

  • Closed-loop steering control using encoder feedback

  • CAN / CANopen / J1939 communication with steering actuators and drives

  • Steering diagnostics, fault detection, and fallback handling

These capabilities enable stable and predictable steering behavior under varying loads and operating conditions.

Integration with the Overall Vehicle Control System

Multi-mode steering is not an isolated function.
In straddle carriers, steering behavior must be coordinated with drive control, braking, safety logic, and operator interaction at the vehicle control level.

Within the SonnePower solution, the central vehicle controller integrates with vehicle HMI displays, distributed I/O modules, and operator keypads to form a complete vehicle control system.
Steering status, active steering modes, fault information, and system diagnostics can be visualized on the display, while steering commands and mode selections are handled through dedicated keypads.

I/O modules interface with steering sensors, limit switches, and safety signals, enabling reliable signal acquisition and actuator control across the vehicle.

This integrated architecture allows steering control to be synchronized with vehicle motion and operator input, improving operational safety, system transparency, and overall efficiency within the straddle carrier electrical control system.